YES – MSMD branded R.O. Water works on the same principle of the Reverse Osmosis process which is the most efficient system of removing 90% to 99% of all contaminants. The pore structure of R.O. membranes is much tighter than UF membranes. R.O. membranes are capable of rejecting practically all particles, bacteria and organics >300 Daltons molecular weight (including pyrogens). R.O. technology is most ideally utilized by most leading water bottling plants.
Natural Osmosis occurs when solutions with two different concentrations are separated by a semi-permeable membrane. Osmotic pressure drives water through the membrane, the water dilutes the more concentrated solution and the end result is equilibrium.
In water purification systems, hydraulic pressure is applied to the concentrated solution to counteract the osmosis pressure. Pure water is driven from the concentrated solution and collected downstream of the membrane. R.O. membranes being very restrictive yield slow flow rates. Storage tanks are required to produce an adequate volume in a reasonable amount of time.
YES – MSMD’s R.O. is highly effective in removing several impurities from water such as Total Dissolved Solids (TDS), turbidity, asbestos, lead and other toxic heavy metals, radium, and many dissolved organics. The process will also remove chlorinated pesticides and heavier weight VOCs.
R.O. and activated carbon filtration are complementary processes. Combining them results in the most effective treatment against the broadest range of water impurities and contaminants.
YES – MSMD’s R.O. is the most efficient method for purifying tap water if the system is properly designed for the feed water conditions and the intended use of the product water. R.O. is also the optimum pretreatment for reagent – grade water polishing systems.
Semi permeable membranes have come a long way from the natural bladders used in the earlier osmosis experiments. Before the 1960’s, these membranes were too inefficient, expensive, unreliable for practical applications outside the laboratory. Modern advances in synthetic materials have generally solved these problems, allowing membranes to become highly efficient at rejecting contaminants, and making them tough enough to withstand the greater pressures necessary for efficient operation.
Even with these advances, the “reject” water on the source side of a Reverse Osmosis (R.O.) system must be periodically flushed in order to keep it from becoming so concentrated that it forms a scale on the membrane itself. R.O. system also typically require a carbon pre-filter for the reduction of chlorine, which can damage a R.O. membrane and a sediment pre-filter is always required to ensure that fine suspended materials in the source water softening for residential units or chemical softening for industrial use, may also be desirable in hand water areas.
What YES – MSMD Branded Reverse Osmosis (R.O.) Treats?YES – MSMD Branded R.O. can treat a wide variety of health and aesthetic contaminants. Effectively designed, R.O. equipment can treat for a wide variety of aesthetic contaminants that cause unpleasant taste, color and odor problems like salty or soda taste caused by chlorides or sulfates.
YES – MSMD’s R.O. can also be effective for treating health contaminants like arsenic, asbestos, atrazine (herbicides/pesticides), fluoride, lead, mercury, nitrate and radium. When using appropriate carbon pre-filtering (commonly included with most R.O. systems), additional treatment can also provided for such “volatile” contaminants as benzene, trichloroethylene, trihalomethanes and radon. Some R.O. equipment is also capable of treating for biological contaminants like Cryptosporidium. The Water Quality Association (WQA) cautions that while R.O. membranes typically remove virtually all known micro organisms and most other health contaminants, design considerations may prevent a unit from offering foolproof protection when incorporated into consumer drinking water system.
When looking for a product to treat for a given health contaminant, care should be used to find products that have been tested successfully for such purposes at a quality testing laboratory.
Why YES – MSMD Branded Reverse Osmosis (R.O.)?
By using YES – MSMD’s R.O. technology, wide range of substances, including arsenic, asbestos, herbicides, pesticides, lead, mercury, nitrate, radium and bacteria commonly found in many kinds of water, are easily and cost effectively removed. R.O. can also treat a wide variety of aesthetic contaminants that caused unpleasant taste color and ordour, such as salty or soda taste caused by chlorides or sulphates. The highly dangerous pathogem, cryptospondium which can lead to serious illness and sometimes death is also treatable with R.O. system.
R.O. Water has been confirmed as the purest drinking water by NASA and meets the World Health Organization specification standards. Its excellent solubility properties facilitate improved metabolism in the human body. This increases immunity to infection and helps in the expulsion of harmful toxins and viruses. In the long term, drinking reverse osmosis water may contribute towards improved health.
YES – MSMD Branded Reverse Osmosis (R.O.) Water in Conclusion
R.O. is a relatively new, but very effective application of an established scientific process. Whether it is used to meet the needs of a typically family of four or the needs of an industrial operation requiring thousands of gallons per day, it can be a cost effective to provide the required quantity of highly treated water. With continual advances in system and membrane design that boast efficiency and reliability, R.O. can be expected to play a major role in water treatment for years to come.
Available Packaging Sizes:
YES – MSMD R.O. Water bottled and packed as below:
The YES – MSMD Branded R.O. Water can be delivered ex-factory to any destination in Malaysia and also any part in the World.
Our prices are competitive and very much lower than market rates which make it easily marketable and consumable by everyone.